Dishwasher installation
Once the door panel is positioned cor- rectly :
Open the dishwasher door.
Tighten all the Torx screws on the edges of the dishwasher door.
Use the provided caps to plug the locking screw access holes.
Open the dishwasher door slightly. If the locking screws on the edge of the dishwasher door can not be reached, the dishwasher will have to be pulled out of its recess a few inches.
Push up one side of the door panel until it touches the spacer bars (or control panel if spacer bars are not being used) and lightly tighten the T20 Torx screw on the correspond- ing edge of the machine door.
Repeat the process with the other side of the door panel.
Shut the door.
Check that the door panel is adjusted correctly. It should be snug at the top and neatly aligned with the cabinet drawer and door lines. If it isn’t aligned properly, loosen the Torx screws and readjust the panel
58
