Miele G 890 manual Problem solving guide, After sales service, Program update function - PC

Problem solving guide After sales service

The wash cycle finishes too early and three horizontal lines “---” ap- pear in the time display.

Press the START/Stop button until the Program Selector indicator lamps light.

Turn off the dishwasher using the ON/OFF switch.

After 5 seconds:

Turn on the machine.

Re-select the program and press the START/Stop button.

If the lines reappear in the display there is machine fault. Please call the MIELE Service Department.

Under certain circumstances you may still be able to use the “RINSE & HOLD” and “ENERGY SAVER” pro- grams. The “Time left” will be displayed once the program has begun.

After sales service

If you are still having problems, please contact the Miele Service Department. (See back cover for addresses).

Please have the model and serial num- bers of your appliance available. This information can be found on the data plate on the upper edge of the door.

Program update function - PC

The Salt indicator lamp has a second function: It allows a technician with the proper equipment to change the pro- gramming of the dishwasher to take ad- vantage of the latest technological de- velopments.

For instance, if a detergent becomes available that gives good wash results using only cold water, the wash pro- grams can be changed to take advant- age of this development to help reduce your energy costs.

47