Miele G 890 Choosing a program, “ENERGY SAVER” Program, 45 C/115 F is necessary for this program

Models: G 890

1 72
Download 72 pages 19.44 Kb
Page 29
Image 29
Choosing a program

Choosing a program

The wash program chosen should de- pend on the type of dishes and the de- gree of soiling.

In most cases the LIGHT WASH pro- gram, a NORMAL program or the IN- TENSIVE program will give excellent re- sults.

The available programs and some of their applications are listed in the Pro- gram Chart on the next two pages.

“ENERGY SAVER” Program.

Use this program for lightly to nor- mally soiled dishware.

A warm water intake (temperature of the incoming water) of at least

45 °C/115 °F is necessary for this program.

Water is not heated in this program. Only 0.10 kWh of electricity (approx.) is used during this cycle.

The drying result may not match that of a program with a full drying cycle.

The higher the temperature of the in- take water, the better the drying results.

Open the door of the dishwasher

2-3 inches (5-6 mm) at the end of the program to speed the drying pro- cess.

29

Page 29
Image 29
Miele G 890 manual Choosing a program, “ENERGY SAVER” Program, 45 C/115 F is necessary for this program