Miele G 8XX let/Drain is flashing and, the programme does not, continue, Problem solving guide

Problem solving guide

Problem	Possible cause	Remedy
The indicator light "In-		Before rectifying the prob-
let/Drain" is flashing and		lem you must:
the programme does not		– Press the "Start/Stop"
continue.		button
		– Switch the dishwasher
		off using the "On/Off"
		button.
	Water intake is restricted.	– Open the stopcock
		fully.
		– Check the water inlet
		filter and clean if nec-
		essary, see "Cleaning
		the water inlet filter".
		– The water pressure at
		the intake is lower than
		0.3 bar. Seek profes-
		sional advice.
	Water outlet is restricted,	– Clean the filter combi-
	water remains in the wash	nation, see "Cleaning
	cabinet at the end of a	and Care".
	programme.	– Clean the drain pump,
		see "Cleaning the drain
		pump and non-return
		valve".
		– Clean the non-return
		valve, see "Cleaning
		the drain pump and
		non-return valve".
		– Remove any kink in the
		drain hose.

48