Before using for the first time
Setting the machine for water hard- ness level 4.1 - 12.6 mmol/l (23°d - 70°d):
^Using the programme selector but- tons %(19) keep pressing down through programme position 6 until the "Wash/Rinse" (16) indicator light flashes.
You are now in the second program- ming level.
^Use the programme selector buttons (19) to select the programme that corresponds to your water hardness level (see Table 2).
The indicator light next to the programme selected (14) and the "Wash/Rinse" indicator light (16) will start to flash.
Table 2:
°d | mmol/l | Programme |
(German |
| position |
scale) |
|
|
|
|
|
23 - 35 | 4.1 - 6.3 | 1 |
|
|
|
36 - 70 | 6.5 | 2 |
|
|
|
^Press the "Start/Stop" button (17) twice.
The programmed water hardness level is now stored in memory.
^Switch the dishwasher off using the "On/Off" button (13).
Checking the programmed water hardness level
^Switch the dishwasher off using the "On/Off" button (13).
^Press the "Start/Stop" button (17) in and whilst holding it in switch the dishwasher on using the "On/Off" but- ton (13).
Release the "Start/Stop" button within two seconds.
The water hardness level programmed into the machine is indicated by a light being on next to one of the programmes.
There are two programming levels.
If the "Wash/Rinse" indicator light (16) is on, you are in the first level
(see Table 1).
If the "Wash/Rinse" indicator light (16) is flashing, you are in the second level (see Table 2).
^Switch the dishwasher off using the "On/Off" button (13).
15
