2 Turn the flash on, and then turn the camera on.

●●A red [] icon is now displayed.

●●The flash pilot lamp will light up when the flash is ready.

3 Choose shooting mode [], [], [], or [].

●●Flash settings can only be configured in these modes. In other modes, the flash is adjusted and fired automatically, as needed.

4 Set the white balance to [] (=76).

5 Configure the external flash.

●●Press the [] button, choose [Flash Control] on the [] tab, and then press the [] button.

●●Options already set on the flash itself are displayed.

●●Press the [][] buttons to choose an item, and then press the [ ][ ] buttons to adjust the setting.

●●Available items vary depending on the shooting mode and the flash attached (=163).

●● Settings for the built-in flash cannot be configured while a Speedlite EX series flash is attached, because that setting screen is no longer accessible.

●● You can also access the setting screen by pressing the [] button for at least one second.

●● Flash settings in [] shooting mode can be configured just as they are in [] mode.

●● 600EX-RT/580EX II only: [Flash Control] is not available if the external flash has been set up for stroboscopic flash.

●● 320EX only: Auto LED lighting is only available in low-light movie recording or in Movie mode. In this case, the [] icon is shown.

Using Speedlite Bracket SB-E2 (Sold Separately)

 Still Images   Movies

●●Using the optional Speedlite Bracket SB- E2 can help prevent unnatural shadows next to subjects during vertical shooting.

●●To keep the LCD screen out of the way of the bracket, use the screen closed and facing outward.

Before Use

Basic Guide

Advanced Guide

1 Camera Basics

2 Auto Mode /

Hybrid Auto Mode

3 Other Shooting Modes

4 P Mode

5 Tv, Av, M, C1, and C2 Mode

6 Playback Mode

7 Wi-Fi Functions

8 Setting Menu

9 Accessories

10 Appendix

Index

162