●● Once you have connected to devices via the
●● If you prefer not to display recent target devices, choose MENU (=30) ► [] tab ►
●● A message is displayed if the nickname you enter begins with a symbol or space. Press the [] button and enter a different nickname.
●● When the camera is connected to a computer, the camera screen is blank.
●● Mac OS: If CameraWindow is not displayed, click the [CameraWindow] icon in the Dock.
●● To disconnect from the camera, turn off the camera.
●● If you chose [PIN Method] in step 6, a PIN code will be displayed on the screen. Be sure to set this code in the access point. Choose a device in the [Select a Device] screen. For further details, refer to the user manual included with your access point.
Connecting to Listed Access Points
1 View the listed access points.
●●View the listed networks (access points) as described in steps 1 – 4 of “Using
2 Choose an access point.
●●Press the [][] buttons to choose a network (access point), and then press the [] button.
3 Enter the access point password.
●●Press the [] button to access the keyboard, and then enter the password (=31).
●●Press the [][] buttons to choose [Next], and then press the [] button.
4 Choose [Auto].
●●Press the [][] buttons to choose [Auto], and then press the [] button.
●●To save images to a connected computer, follow the procedure from step 8 in “Using
●● To determine the access point password, check on the access point itself or refer to the user manual.
●● Up to 16 access points will be displayed. If no access points are detected even after you choose [Refresh] in step 2 to update the list, choose [Manual Settings] in step 2 to complete access point settings manually. Follow
●● When you use an access point that you have already connected to for connecting to another device, [*] is displayed for the password in step 3. To use the same password, press the [][ ] buttons to choose [Next], and then press the [] button.
Previous Access Points
You can reconnect to any previous access points automatically by following step 4 in “Using
●● To reconnect to the access point, confirm that the target device is already connected to it, and then follow the procedure from step 8 in “Using
●● To switch access points, choose [Switch Network] on the screen displayed after connection, and then either follow the procedure in “Using
Before Use
Basic Guide
Advanced Guide
1 | Camera Basics |
|
|
2 | Auto Mode / |
Hybrid Auto Mode | |
|
|
3 | Other Shooting Modes |
|
|
4 | P Mode |
|
|
5 | Tv, Av, M, C1, and C2 Mode |
|
|
6 | Playback Mode |
|
|
7 | |
|
|
8 | Setting Menu |
|
|
9 | Accessories |
|
|
10 | Appendix |
Index
132