●● After you set the shutter speed or aperture value, the exposure level may change if you adjust the zoom or recompose the shot.
●● Screen brightness may change depending on your specified shutter speed or aperture value. However, screen brightness remains the same when the flash is up and the mode is set to [].
●● With shutter speeds of 1.3 seconds or slower, ISO speed is [] and cannot be changed.
●● | [ ]: Manual |
●● | Calculation of standard exposure is based on the specified |
| metering method (=72). |
|
|
Adjusting the Flash Output
Still Images Movies
Choose from the three flash levels in [] mode.
1 Enter [] mode.
●●Set the mode dial to [].
2 Specify the flash mode.
●●Press the [] button, choose [Flash Control] on the [] tab, and then press the [] button.
●●In [Flash Mode], choose [Manual] (=30).
3 Configure the setting.
●●Raise the flash, press the [ ] button and
immediately turn the [] dial to choose the flash level, and then press the [] button.
●●Once the setting is complete, the flash output level is displayed.
[ ]: Minimum, [ ]: Medium, [ ]: Maximum
●● You can also set the flash level by accessing MENU (=30) and choosing [] tab ► [Flash Control] ► [Flash Output].
●● You can also access the
(=30) as follows (except when an optional external flash is mounted).
press the [] button.
Before Use
Basic Guide
Advanced Guide
1 | Camera Basics |
|
|
2 | Auto Mode / |
Hybrid Auto Mode | |
|
|
3 | Other Shooting Modes |
|
|
4 | P Mode |
|
|
5 | Tv, Av, M, C1, and C2 Mode |
|
|
6 | Playback Mode |
|
|
7 | |
|
|
8 | Setting Menu |
|
|
9 | Accessories |
|
|
10 | Appendix |
Index
94