Lens Retraction Timing

The lens is normally retracted for safety about one minute after you press the [ ] button in Shooting mode (=25). To have the lens retracted immediately after you press the [ ] button, set the retraction timing to [0 sec.].

●●Choose [Lens Retraction], and then choose [0 sec.].

Using Eco Mode

This function allows you to conserve battery power in Shooting mode. When the camera is not in use, the screen quickly darkens to reduce battery consumption.

1 Configure the setting.

●●Choose [Eco Mode], and then choose [On].

●●[ ] is now shown on the shooting screen (=180).

●●The screen darkens when the camera is not used for approximately two seconds; approximately ten seconds after darkening, the screen turns off. The camera turns off after approximately three minutes of inactivity.

2 Shoot.

●●To activate the screen and prepare for shooting when the screen is off but the lens is still out, press the shutter button halfway.

Power-Saving Adjustment

Adjust the timing of automatic camera and screen deactivation (Auto Power Down and Display Off, respectively) as needed (=26).

●●Choose [Power Saving], and then press the [] button.

●●After choosing an item, press the [ ][ ] buttons to adjust it as needed.

●● To conserve battery power, you should normally choose [On] for [Auto Power Down] and [1 min.] or less for [Display Off].

●● The [Display Off] setting is applied even if you set [Auto Power Down] to [Off].

●● These power-saving functions are not available when you have set Eco mode (=147) to [On].

Before Use

Basic Guide

Advanced Guide

1

Camera Basics

 

 

2

Auto Mode /

Hybrid Auto Mode

 

 

3

Other Shooting Modes

 

 

4

P Mode

 

 

5

Tv, Av, M, C1, and C2 Mode

 

 

6

Playback Mode

 

 

7

Wi-Fi Functions

 

 

8

Setting Menu

 

 

9

Accessories

 

 

10

Appendix

Index

147