Trimming

You can cut out a portion of a recorded image and save it as a new image file.

Trimming Area

Trimming Area Display

Recorded pixels after trimming

Choose [Trimming].

zPress the nbutton to choose [Trimming] from the 1tab, then press the m button.

Choose an image.

zPress the qrbuttons to choose an image, then press the m button.

Adjust the trimming area.

XA frame will appear around the portion of the image to be trimmed.

XThe original image will display in the upper

left and the trimmed image will display in the lower right.

zIf you move the zoom lever to the left or right, you can change the frame size.

zIf you press the opqr buttons, you can move the frame.

zIf you press the l button, you can change the frame orientation.

zIn an image with detected faces, gray frames appear around the faces located in the upper left image. The frames can be used for trimming. You can switch between frames by pressing the 0 button.

zAfter pressing the mbutton, press the qr buttons to choose [OK], then press the m button again.

Save as a new image and display.

zFollow Steps 4 and 5 on p. 126.

127