Subject in recorded image is too dark.

Insufficient light for

zSet the flash to on

 

(On) (Basic

shooting.

Guide p. 8).

 

 

There is a difference in

zSet the exposure compensation to a

brightness between the

positive (+) setting (p. 48).

background and the

zUse the spot metering function

subject.

(p. 47).

 

 

Subject is too far away

zShoot within correct shooting

for flash to reach.

distance of the subject when using

 

the internal flash (p. 97).

 

zRaise the ISO speed and then shoot

 

(p. 53).

 

 

Subject in recorded image is too bright, or image flashes white.

Subject is too close,

zShoot within correct shooting

making the flash too

distance of the subject when using

strong.

the internal flash (p. 97)

Subject is bright in

zSet the exposure compensation to a

contrast to the

negative (-) setting (p. 48).

background.

zUse the spot metering function

 

(p. 47).

 

 

Light is shining directly

zChange the shooting angle.

on the subject or

 

 

 

reflected off the subject

 

 

 

into the camera.

 

 

 

Flash is set to on.

zSet the flash to off

 

(Flash off)

 

 

(Basic Guide p. 8).

 

 

Image contains noise.

ISO speed is too high. zHigher ISO speeds increase image noise. To take clean images, use as low an ISO speed as possible (p. 53).

zIn Auto mode, (Color Accent) and (Color Swap) modes of

mode, and (Night Snapshot), (Kids&Pets), and (Indoor) modes of Special Scene mode, the ISO speed increases and noise may occur.

Troubleshooting

77