Replacing the Date Battery

If the LCD monitor displays the Date/Time menu when you turn on the camera, this means that the date battery has run down and the clock has stopped running. Please purchase a replacement battery (lithium coin battery CR1220) and install it as follows.

The date battery is preinstalled at the factory and may therefore expire earlier than its rated lifespan after the camera has been purchased.

Be particularly careful to keep the date batteries out of the reach of children. Seek medical assistance immediately if a child swallows a battery since corrosive battery fluids could damage the stomach or intestinal wall.

1Be sure that the camera is turned off.

2Remove the battery

holder.

3 Pull out the battery in the

(–) Negative end

direction as shown with arrow.

 

4Insert the new date battery into the holder with the negative end (–) facing up.

5Replace the date battery holder back into its original position.

Appendix

6 Set the date and time when the Date/Time menu is displayed on the LCD monitor

(Basic Guide p. 2).

89