z It takes approximately 2 hours when two batteries are loaded one at each end of the charger and approximately 4 hours 40 minutes with four for the charger to fully recharge them (as determined by testing at Canon facilities). Please do not charge batteries in areas where the temperature is outside the range of 0 to 35 °C (32 to 95 °F).

zCharging time varies according to ambient temperature and to the batteries' initial charge state.

zThe battery charger may emit noise while charging. This is not a malfunction.

zYou can also use Battery/Charger Kit CBK100 or CBK4-200.

Using an Externally Mounted Flash (Sold Separately)High-Power Flash HF-DC1

This flash is used to supplement the camera's built-in flash when the subject is too far away for proper illumination. Use the following procedures to affix the camera and High-Power Flash to the supporting bracket.

Please read the instructions accompanying the flash along with this explanation.

Tripod

Sockets

Bracket

(Comes with the flash)

Appendix

93