Shooting/Viewing Images on a TV set
You can use a
1Turn off the Camera and the TV.
2Connect the AV cable to the camera’s A/V OUT terminal.
zOpen the terminal cover by
slipping a fingernail under the right edge and plug the AV cable in all the way.
3Plug the other ends of the AV cable to the VIDEO IN and AUDIO IN jacks on the TV.
Yellow IN
VIDEO AUDIO
Black
4Turn on the TV and switch it to Video mode.
5Turn on the camera.
The video output signal can be switched (NTSC or PAL) to accommodate different regional standards (pp. 22, 26). The default setting varies between regions.
-NTSC: Japan, U.S.A., Canada, Taiwan and others
-PAL: Europe, Asia (excluding Taiwan), Oceania and others If the video system is set incorrectly, the camera output may not display properly.
set TV a on Images Shooting/Viewing
71