Safety Instructions
| Using | WARNING |
|
|
|
Never touch the wall outlet when there is leakage of gas, open the windows and ventilate.
It can cause a fire or a burn by a spark.
Do not drop the projector or allow impact shock.
This may cause mechanical failure or personal injury !
Don’t look at laser beam directly as it can cause eye damage!
| Using | NOTES |
|
|
|
Do not place heavy objects on
top of projector.
This may cause mechanical failure or personal injury!
Take care not to impact the lens particularly when moving the projector.
Do not touch the lens of the pro- jector. It is delicate and easily damaged.
Do not use any sharp tools on the projector as this will damage the casing.
| Cleaning | WARNING |
|
|
|
Do not use water while cleaning the projector
This may cause damage to the projector or an electric shock hazard.
In the unlikely event of smoke or a strange smell from the projector, switch it off , unplug it from the wall outlet and contact your dealer or service centre.
This may cause a fire or an electric shock hazard or damage to the unit!
Use an air spray or soft cloth that is moist with a neutral detergent and water for removing dust or stains on the projection lens.
| Cleaning | NOTES |
|
|
|
Contact the Service Center once a year to clean the internal parts of the projector.
Accumulated dust can cause mechanical failure.
When cleaning the plastic parts such as projector case, unplug the power and wipe it with a soft cloth. Do not use cleanser, spray water or wipe with a wet cloth. Especially, never use cleanser (glass cleaner), automobile or industrial shiner, abrasive or wax, benzene, alcohol etc., which can damage the product. Use an air spray or soft cloth that is moist with a neutral detergent and water for removing dust or stains on the projection lens.
It can cause fire, electric shock or product damage (deformation, corrosion and damage).
| Others | WARNING |
|
|
|
Do not attempt to service the projector yourself. Contact your dealer or service centre.
This may cause damage to the projector and could give an electric Shock as well as invalidating the warranty !
| Others | NOTES |
|
|
|
Be sure to unplug if the projector is not to be used for a long peri- od.
Accumulated dust may cause a fire hazard or damage to the unit!
Do not mix new batteries with old | Only use the specified type of |
batteries. | battery. |
This may cause the batteries to over- | This could cause damage to the |
heat and leak. | remote control. |
6
