LG Electronics HS102 owner manual Basic Operation of the Projector

Installing and Composition

Basic Operation of the Projector

1.Place the projector on a sturdy and horizontal surface with the PC or AV source.

2.Place the projector with the desired distance from the screen. The distance between the projector and the screen determines the actual size of the image.

3.Position the projector so that the lens is set at a right angle to the screen. If the projector is not set at a right angle, the screen image will be crooked. If this is so then the keystone adjustment may correct this (Refer to page 27.).

4.Connect the cables of the projector to a wall power socket and other connected sources.

projection distance based on the picture format

Screen height (X)

X/2

Screen

Projection off-set ratio:100%

X/2

Y/2

Screen Width (Y)

Y/2

Projection distance (D)

Screen

43mm

Projection distance (D)

4 : 3 Scale

Diagonal Size

(inch)

Diagonal Size

(mm)

Horizontal Size

(mm)

Vertical Size Projection Distance(D)

(mm)(mm)

13