Manuals / Brands / Photography / Digital Camera / Canon / Photography / Digital Camera

Canon A630 „Reviewing an Image Right After Shooting, DISP, FUNC./SET, 5.Focus and shoot, 2.Press the shutter button fully to shoot

1 35

Download 35 pages, 1.44 Mb

5.Focus and shoot.

1.Press the shutter button halfway to focus.

When the camera focuses, the camera beeps twice and the indicator lights green (orange when using the flash). Also, the AF frame appears in green on the LCD monitor at the point where the camera is focused.

2.Press the shutter button fully to shoot.

The shutter sound will play and the image will record. The indicator will blink green while the image is recorded to the memory card.

Indicators

Indicators

ÎSee Selecting a Shooting Mode (p. 11).

ÎSee Indicators (p. 4).

ÎSee the Advanced Guide: Selecting an AF Frame (p. 47).

ÎSee the Advanced Guide for the various shooting methods available.

Reviewing an Image Right After Shooting

After a shot is taken, the image appears in the LCD monitor for approximately 2 seconds.

You can continue to display images regardless of the review duration setting with the following procedures.

•Keeping the shutter button pressed after a shot.

•Pressing the FUNC./SET or DISP. button while the image is displayed in the LCD monitor.

To stop displaying the image, press the shutter button halfway.

ÎSee the Advanced Guide: Review (p. 21).

ÎSee Erasing (p. 20).

10

Contents

The Components Guide Page „Front View „Back View „Controls zUpper Indicator Green: Blinking Green: Orange: Blinking Orange: 1.Installing the batteries 2.Inserting the memory card 1.Insert the memory card until it clicks into place „To Remove the Memory Card „Opening the LCD Monitor „Setting the Date/Time „Setting the Display Language 1.Press the power button 2.Set the mode switch to (shooting) (a) 3.Set the shooting mode dial to (b) 4.Aim the camera at the subject „Reviewing an Image Right After Shooting „Shooting Modes Page Page 1.Press the zoom lever toward or 1.Press the button to cycle through flash settings „Setting the Red-EyeReduction Function „Setting the Slow Synchro Function 1.Press the button 1.FUNC. Menu * (Drive Mode) „Changing the Delay Time and Number of Shots () 1. Set the mode switch to(playback) (a) 2.Use theorbutton to display the image you wish to view (b) 2.Confirm that [Erase] is selected and press the FUNC./SET button (c) Please note that erased images cannot be recovered Exercise adequate caution before erasing an image c d c Use the or button to select a menu item d Use the or button to select an option for the menu item e Press the FUNC./SET button a Press the MENU button b Use the or button to switch between menus d Use the button to select an option FUNC./SET Page 2.Turn on the power in playback mode and confirm that , or is displayed in the upper left of the LCD monitor (a) 3.Select an image to print using the or button (b) and press the button (c) „Camera to Computer Connection „Using a Memory Card Reader „ Windows „Macintosh „Items to Prepare 2.Connecting the camera to a computer 2.Set the camera mode switch to (playback) and turn on the power 1.Select [Canon CameraWindow] and click [OK] (first time only) 2.Download the images Downloading Images to a Computer 1.Download the images Confirm that the Direct Transfer menu is displayed on the camera’s LCD monitor „All Images/New Images/DPOF Trans. Images „Select & Transfer/Wallpaper Be sure to also read the safety precautions listed in the Advanced Camera User Guide