Canon A630 1.Press the button

Shooting Close-ups (Macro)

1.Press the button.

To cancel the macro mode, press the button to turn off the or display.

Macro

Use this mode to shoot close-ups of flowers or small items.

Image Area at Minimum Shooting Distance from End of Lens to Subject:

• Maximum wide angle setting: 22 x 16 mm (0.87 x 0.63 in.) Minimum shooting distance: 1 cm (0.39 in.)

• Maximum telephoto setting: 76 x 57 mm (3.0 x 2.2 in.) Minimum shooting distance: 25 cm (9.8 in.)

Shooting

• Use the LCD monitor to compose close-ups in macro mode since images composed with the viewfinder may be off- center.

• Check the range of the flash when using it in macro mode (Advanced Guide p. 127).

This setting cannot be set in some shooting modes.

ÎSee the Advanced Guide: Functions Available in Each Shooting Mode (p. 143).

ÎSee Selecting a Shooting Mode (p. 11).

Contents

The Components Guide Page „Front View „Back View „Controls zUpper Indicator Green: Blinking Green: Orange: Blinking Orange: 1.Installing the batteries 2.Inserting the memory card 1.Insert the memory card until it clicks into place „To Remove the Memory Card „Opening the LCD Monitor „Setting the Date/Time „Setting the Display Language 1.Press the power button 2.Set the mode switch to (shooting) (a) 3.Set the shooting mode dial to (b) 4.Aim the camera at the subject „Reviewing an Image Right After Shooting „Shooting Modes Page Page 1.Press the zoom lever toward or 1.Press the button to cycle through flash settings „Setting the Red-EyeReduction Function „Setting the Slow Synchro Function 1.Press the button 1.FUNC. Menu * (Drive Mode) „Changing the Delay Time and Number of Shots () 1. Set the mode switch to(playback) (a) 2.Use theorbutton to display the image you wish to view (b) 2.Confirm that [Erase] is selected and press the FUNC./SET button (c) Please note that erased images cannot be recovered Exercise adequate caution before erasing an image c d c Use the or button to select a menu item d Use the or button to select an option for the menu item e Press the FUNC./SET button a Press the MENU button b Use the or button to switch between menus d Use the button to select an option FUNC./SET Page 2.Turn on the power in playback mode and confirm that , or is displayed in the upper left of the LCD monitor (a) 3.Select an image to print using the or button (b) and press the button (c) „Camera to Computer Connection „Using a Memory Card Reader „ Windows „Macintosh „Items to Prepare 2.Connecting the camera to a computer 2.Set the camera mode switch to (playback) and turn on the power 1.Select [Canon CameraWindow] and click [OK] (first time only) 2.Download the images Downloading Images to a Computer 1.Download the images Confirm that the Direct Transfer menu is displayed on the camera’s LCD monitor „All Images/New Images/DPOF Trans. Images „Select & Transfer/Wallpaper Be sure to also read the safety precautions listed in the Advanced Camera User Guide