4.2.5Schedule
RX Radiator uses very strong tool - scripts for scheduling of the recordings. It is not necessary to write commands in some obscure programming language - everything is intuitive, easy and pleasant.
Both Global scheduling active and Current script enabled checkboxes have to be checked for script to run.
Scripts have following (intentional) restrictions:
-only one script can run at the same time (You can define as many scripts as you want. Nevertheless when the 1st script is set to start at 8:00 and will run for 2 minutes and the second one is set to start at 8:01, the second one will not run.)
-recording commands are ignored if you are currently recording something
-recording stops sleep timer
See also Script editor description.
-Global scheduling active Turns on/off the scheduling system. When disabled then no script will run.
- When to run | This section changes for each script chosen in List of created |
scripts |
|
oCurrent script enabled If checked and Global scheduling active is checked too, then script will run in its scheduled time. When unchecked then only this script will not run.
o List of created scripts | Select a script to modify here. | |
o | How often | Periodicity of repeating of the script. |
o | Time | Set time for script to run. When Hourly is chosen in How |
often combo box then only minutes and seconds part is used – i.e. in this case 12:00:00 and 15:00:00 has the same result.
User Manual | Page 20 |