Appendix 3: Messages for remote controlling RX Radiator
const |
|
WM_MyVolUp=WM_USER + 1001; | volume up |
WM_MyVolDown=WM_USER + 1002; | volume down |
WM_MyMute=WM_USER + 1003; | mute |
WM_MyUnmute=WM_USER + 1004; | unmute |
WM_MyStatUp=WM_USER + 1005; | station up |
WM_MyStatDown=WM_USER + 1006; | station down |
WM_MyLastStat=WM_USER + 1007; | last station |
WM_MySurf=WM_USER + 1008; | starts/stops surfing |
WM_MyTuneStatNo=WM_USER + 1009; | wPar= 1 .. 24 |
WM_MyTuneFr=WM_USER + 1010; | wPar= 06000 to 13000 |
| (for example wPar=8970 for fr. 89.7 MHz) |
WM_MyMin=WM_USER + 1011; | minimize |
WM_MyMax=WM_USER + 1012; | maximize |
WM_MyThin=WM_USER + 1013; | thin window |
WM_MyRecord=WM_USER + 1014; | starts/stops recording |
WM_MyRadClose=WM_USER + 1015; | close RX Radiator |
WM_MyRestore=WM_USER + 1016; | restores from minimized state |
WM_MyMonoStereo=WM_USER + 1017; | toggles mono/stereo |
WM_MyStereo=WM_USER + 1018; | stereo on |
WM_MyMono=WM_USER + 1019; | mono on |
WM_MyMuteUnmute=WM_USER + 1020; | toggles mute/unmute mode |
WM_MyToggleThin=WM_USER + 1021; | toggles thin/maximized window |
WM_MyToggleTray=WM_USER + 1022; | toggles tray icon/normal window |
WM_MyFineTuneUp=WM_USER + 1023; | fine tune up |
WM_MyFineTuneDown=WM_USER + 1024; | fine tune down |
WM_MyCoarseTuneUp=WM_USER + 1025; | tune up |
WM_MyCoarseTuneDown=WM_USER + 1026; tune down | |
WM_MyScanUp=WM_USER + 1027; | scan up |
WM_MyScanDown=WM_USER + 1028; | scan down |
WM_MyToggleOnTop=WM_USER + 1029; | toggless on/off always on top |
WM_MyLCD=WM_USER + 1030; | set LCD text |
WM_MyRecordName=WM_USER + 1031; | stop recording and save it with given name |
WM_MyLockLCD=WM_USER + 1032; | prevent LCD from being updating |
WM_MyReleaseLCD=WM_USER + 1033; | unlock LCD |
WM_MyRefreshLCD=WM_USER + 1034; | force RX Radiator to refresh LCD |
WM_MyLoopOn=WM_USER + 1035; | loop recording on |
WM_MyLoopOff=WM_USER + 1036; | loop recording off |
WM_MyToggleLoop=WM_USER + 1037; | toggles loop recording on/off |
WM_MySleep=WM_USER + 1038; | toggles sleep timer on/off, parameters wPar: |
| 0 for switching off and 10, 20, 30, 60, 120, |
| 300 (minutes); |
If lPar = 1, then Windows will be shut down
Example:
You can use it in some programming language (example in Delphi):
User Manual | Page 37 |
