Appendix 2: Using command line utility for remote controlling RX Radiator
If you have RX Radiator running and want to control it for example from another application, from batch file and so on, you can do that by utilizing small application rc.exe (22 kB).
It is placed in the following folder [RX Radiator base
List of parameters
Parameters are separated by spaces: rc command1 command 2
Example: rc fr8970 x vu (tune frequency 89.70 MHz, maximize RX Radiator and set volume one step up).
Tuning
fr | tune frequency (fr10685 for 106.85 MHz) |
finetuneup, fu | fine tune up |
finetunedown, fd | fine tune down |
tuneup, tu | coarse tune up |
tunedown, td | coarse tune down |
scanup, scu | scan up |
scanup, scd | scan down |
Stations
no | station number (no11 for switching to station No. 11) |
statup, su | station up |
statdown, sd | station down |
last, l | last station |
surf, f | station surfing |
Sound
muteunmute, mu toggle mute/unmute
mute, m | mute sound |
unmute, u | unmute sound |
volup, vu | volume up |
voldown, vd | volume down |
monostereo, ms toggle mono/stereo
stereo, st | stereo |
mono, mo | mono |
User Manual | Page 35 |