Canon A630 „ Windows, „Macintosh

System Requirements

Please install the software on a computer meeting the following minimum requirements.

Windows

OS	Windows 98 Second Edition (SE)
	Windows Me
	Windows 2000 Service Pack 4
	Windows XP (including Service Pack 1 and Service
	Pack 2)
Computer Model	The above OS should be pre-installed on computers with
	built-in USB ports.
CPU	Pentium 500 MHz or higher processor
RAM	Windows 98 SE/Windows Me	128 MB or more
	Windows 2000/Windows XP	256 MB or more
Interface	USB
Free Hard Disk	zCanon Utilities
Space	- ZoomBrowser EX	200 MB or more
	- PhotoStitch	40 MB or more
	zCanon Camera TWAIN Driver	25 MB or more
	zCanon Camera WIA Driver	25 MB or more
Display	1,024 x 768 pixels/High Color (16 bit) or better

Macintosh

OS	Mac OS X (v10.2 – 10.4)
Computer Model	The above OS should be pre-installed on computers with
	built-in USB ports.
CPU	PowerPC G3/G4/G5 or Intel processor*
RAM	256 MB or more
Interface	USB
Free Hard Disk	zCanon Utilities
Space	- ImageBrowser	200 MB or more
	- PhotoStitch	40 MB or more
Display	1,024 x 768 pixels/32,000 Colors or better

*EOS Utility (software for EOS DIGITAL series cameras) is only supported by PowerPC.

26

Contents

The Components Guide Page „Front View „Back View „Controls zUpper Indicator Green: Blinking Green: Orange: Blinking Orange: 1.Installing the batteries 2.Inserting the memory card 1.Insert the memory card until it clicks into place „To Remove the Memory Card „Opening the LCD Monitor „Setting the Date/Time „Setting the Display Language 1.Press the power button 2.Set the mode switch to (shooting) (a) 3.Set the shooting mode dial to (b) 4.Aim the camera at the subject „Reviewing an Image Right After Shooting „Shooting Modes Page Page 1.Press the zoom lever toward or 1.Press the button to cycle through flash settings „Setting the Red-EyeReduction Function „Setting the Slow Synchro Function 1.Press the button 1.FUNC. Menu * (Drive Mode) „Changing the Delay Time and Number of Shots () 1. Set the mode switch to(playback) (a) 2.Use theorbutton to display the image you wish to view (b) 2.Confirm that [Erase] is selected and press the FUNC./SET button (c) Please note that erased images cannot be recovered Exercise adequate caution before erasing an image c d c Use the or button to select a menu item d Use the or button to select an option for the menu item e Press the FUNC./SET button a Press the MENU button b Use the or button to switch between menus d Use the button to select an option FUNC./SET Page 2.Turn on the power in playback mode and confirm that , or is displayed in the upper left of the LCD monitor (a) 3.Select an image to print using the or button (b) and press the button (c) „Camera to Computer Connection „Using a Memory Card Reader „ Windows „Macintosh „Items to Prepare 2.Connecting the camera to a computer 2.Set the camera mode switch to (playback) and turn on the power 1.Select [Canon CameraWindow] and click [OK] (first time only) 2.Download the images Downloading Images to a Computer 1.Download the images Confirm that the Direct Transfer menu is displayed on the camera’s LCD monitor „All Images/New Images/DPOF Trans. Images „Select & Transfer/Wallpaper Be sure to also read the safety precautions listed in the Advanced Camera User Guide