Chapter 4. Using the CD-4070NW
33
•The paper side guide is inscribed with a loading limit mark
(). This mark indicates the total thickness of
approximately 100 sheets of plain paper for recording
(80 g/m2). Do not place documents above this mark.
Otherwise, this may result in a paper jam.
6Place the document face up, then adjust the paper side
guides to match the width of the document.
7Specify the recording name → press [Start].
For information on how to specify the recording name, see
“CD-R Document Recoder CD-4070NW Instructions
(Software Version).”
Recording starts.
NOTE
• If feeding stops while recording due to a system error or
paper jam, resolve the problem, confirm that the last
document page fed was correctly recorded, and then
continue recording.
• Take care that documents with low paper thickness do not
fall from the document eject tray.
8When no more document pages remain.
If you selected [Standard] Feeding:
Recording ends when no more document pages remain, and
the document image is displayed.
If you selected [Auto] Feeding:
Recording is suspended. Recording continues if a
document is loaded and detected. Automatic feeding can be
repeated until you press [Abort].
LTR
A4
B4