Canon CDI-E067-010 Using the ND Filter

Using the ND Filter

The brightness can be decreased by setting the ND filter on. This allows you to select a smaller aperture and a slower shutter speed than usual.

1 Press the button to turn on the LCD monitor.

2 Select [ND Filter] in the [ (Rec.)] menu.

• See Selecting Menus and Settings (p. 42).

3 Select [On] and press the button.

• appears on the Display Panel. also appears on the LCD monitor if it is on.

• Always use a tripod to prevent camera shake in this mode.

• Some settings are not available with certain Shooting modes. Please refer to Functions Available in Each Shooting Mode (p. 204).

•Standard brightness is decreased to approximately 1/8 when the ND filter is on. For example, if the appropriate aperture value is 5.6, it becomes 2 when the ND filter is on.

110