Viewing Images on a TV Set

A video-compatible television connected via the supplied AV cable AVC-DC100 can be used to view images as you shoot or replay them.

1 Turn off the camera (p. 29).

2

Attach AV Cable AVC-DC100 to the

terminal on the camera.

3 PlugYellow

To the

Video In Jack

Plug the other ends of the AV cable to the video in and audio in jacks on the TV.

 

 

 

 

 

 

 

 

 

 

 

 

 

To the

Black

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

Plug

 

 

 

 

 

Audio In Jack

4 Turn on the TV and switch it to Video mode.

5

Turn the mode lever to

or

(p. 28, 29).

• The image will appear on the TV. Shoot or replay images as usual.

 

• If the images are not appearing on the TV when shooting, press the

 

 

 

button.

 

 

 

 

 

 

 

 

 

 

 

 

• No image will appear on the LCD monitor when the camera is connected to a TV

 

monitor.

 

 

 

 

 

• The video output signal can be switched (NTSC or PAL) to accommodate different

 

regional standards (p. 165). The default setting will vary between regions.

 

NTSC: Japan, U.S.A., Canada, Taiwan, etc.

 

PAL: Europe, Asia (excluding Taiwan), Oceania, etc.

 

If an incorrect video system is set, the output image will not display properly.

 

• If the TV is a stereo model, you can plug the audio plug into either the left or right

 

Audio In jack. Please refer to the TV´s manual for details.

 

• A TV monitor cannot be used in

 

 

 

mode.

 

 

 

 

 

 

 

 

154