The LCD monitor can also be positioned as below.

1

Open the LCD monitor left 180 degrees

and tilt it 180 degrees toward the lens.

•In this position, icons and messages do not appear on the LCD monitor.

• The image shown on the LCD monitor is automatically flipped and reversed so that it appears correctly from in front of the lens.

2

Fold the LCD monitor back against the

camera body.

• Fold it until it clicks into place against the camera body. If it is not fully closed, the image will appear reversed and icons and messages will not display.

•Icons and messages will appear and images will show properly (not reversed) when the LCD monitor is folded right against the camera until it clicks.

Switching between Display Modes

Pressing the button switches the LCD monitor display mode.

2Shooting Mode

•Pressing the button cycles the LCD monitor to the next mode each time the button is pressed.

On (No Information) ➝ On (Information View)* ➝ Off

*Depending on the LCD monitor´s position, the information view may not display.

Preparing the Camera, Basic Functions

33