Canon DC40 instruction manual 128

Message		Explanation
PAPER ERROR	There is a problem with the paper. Wrong paper size is inserted, the ink
	cannot be used with the selected paper or paper output tray is open.
NO PAPER	Paper is not correctly inserted or there is no paper.
PAPER JAM	The paper jammed during printing. Select [STOP] to cancel printing.
	After removing the paper, set some paper again and retry printing.
INK ERROR	There is a problem with the ink.
NO INK	The ink cartridge is not inserted or is out of ink.
LOW INK LEVEL	The ink cartridge needs to be replaced soon. Select [CONTINUE] to
	restart printing.
WASTE TANK FULL	Waste tank is full. Select [CONTINUE] to restart printing. Consult a
	Canon Service Center listed in the Contact List provided with the printer
	manual to replace the waste ink absorber.
• FILE ERROR	You attempted to print an image that was recorded with another
• CANNOT PRINT!	camcorder, with a different compression, or was edited on a computer.
COULD NOT PRINT X	You attempted to use the print order settings to print X images that were
IMAGES	recorded with another camcorder, with a different compression or were
	edited on a computer.
SET PRINT ORDER	No still image on the memory card has been marked with a			print
	order.
PRINT ORDER	You attempted to set more than 998 still images in the print order.
ERROR
CANNOT TRIM	You attempted to trim an image that was recorded with another
	camcorder.
READJUST TRIMMING	You changed the print style after you set the trimming settings.
PRINTER ERROR	Cancel printing. Turn off the printer and turn it back on. Check the printer
	status. If the error still persists, refer to the printer’s instruction manual
	and contact the appropriate customer support center or service center.
PRINT ERROR	Cancel printing, disconnect the USB cable and turn off the printer. After a
	while, turn the printer back on and reconnect the USB cable. Check the
	printer status.
	When you are printing using the		button, check the print settings.
HARDWARE ERROR	Cancel printing. Turn off the printer and turn it back on. Check the printer
	status. If the printer is equipped with a battery, it might be exhausted. In
	such case, turn off the printer, replace the battery and turn it back on.
COMMUNICATION	The printer is experiencing a data transfer error. Cancel printing,
ERROR	disconnect the USB cable and turn off the printer. After a while, turn the
	printer back on and reconnect the USB cable. When you are printing
	using the	button, check the print settings.
	Or, you attempted to print from a memory card that contains a large
	number of images. Reduce the number of images.
CHECK PRINT	The print setting cannot be used for printing with the			button.
SETTINGS
INCOMPATIBLE PAPER	The paper settings of the camcorder conflict with the printer’s settings.
SIZE
PRINTER IN USE	The printer is in use. Check the printer status.
PAPER LEVER ERROR	Paper lever error occurred. Adjust the paper selection lever to the proper
	position.
PRINTER COVER OPEN	Close the printer cover securely.
NO PRINTHEAD	No print head is installed in the printer or the print head is defective.

128