Digitally Outputting Analog Video and Audio Signals (Analog-Digital Converter)

Connecting the camcorder to your VCR or 8 mm video camera allows conversion of recorded

E

analog video and audio signals to digital signals in an instant. The digital signals can be output to

 

the other equipment with a DV terminal. The camcorder’s DV terminal works exclusively as an

 

output terminal.

 

•There may be cases where analog-digital conversion cannot be done properly, depending on the signals output from the connected equipment.

For example: Signals that include the copyright protective signal, or anomalous signals such as ones that include ghost signals, etc.

•You are recommended to use power from a household power source with a power adapter.

•Do not operate with a cassette inserted to the camcorder.

•Turn off the power of all equipment before performing connections.

•Refer also to the instruction manuals of the other equipment connected.

STV-250N Stereo Video Cable

OUTPUT

L

 

 

AUDIO

: Signal flow

R

 

VIDEO

: Signal flow

S-VIDEO

S-150 S-video Cable

 

DV

Side with

IN/OUT

 

arrow

Signal flow :

 

Above illustration shows the connection using a S-video cable. You can also connect the yellow plug to the VIDEO terminal instead.

Editing

103