Canon DIM-462 Searching and Reviewing While Recording, Record Search, Record Review, Note:, Press and release the

Searching and Reviewing While Recording

Record Search

When the camcorder is in record pause mode, you can use record search to play the tape forwards or backwards to find the point where you wish to start or restart recording. This is useful when you wish to add a new scene to a previously used cassette. By using record search, you can ensure a smooth, noise-free join between the new scene and the old one.

TAPE + CAMERA

E

REC SEARCH

1.Press and hold the REC SEARCH + or – button while you check the picture in the display.

•The + button plays the recording forwards and the – button plays it backwards.

2.Release the button when you find the point where you want to start recording.

•The camcorder returns to record pause mode.

Record Review

When the camcorder is in record pause mode, you can use record review to play back the last few seconds of your recording and then return automatically to record pause mode. You can quickly make sure that a scene has recorded properly and then go on to shoot the next scene, without producing any noise in the picture.

TAPE + CAMERA

1.Press and release the c (record review) button while you check the picture in the display.

•The camcorder rewinds the tape, plays back the last few seconds, and returns to record pause mode.

Note:

•Noise may appear on the screen during record search and record review.

Recording

51