Memory Card Operations

Problem

?The memory card will not insert.

?The mark flashes red in the display even though a memory card has been inserted.

?Nothing happens when I press the buttons.

?The PHOTO button does not work.?The image cannot be erased.

E

Cause and/or what to do about it

•It is not turned the right way ( 115).

Turn it the right way and try inserting again.

•Turn the camcorder’s power off and back on again and remove and reinsert the card. If the mark continues to flash, format the memory card.

•The camcorder is not set to CARD CAMERA or

CARD PLAY (VCR) mode ( 118, 120).

•The memory card is not inserted ( 115).

•You are using an SD Memory Card and it is set for erasure prevention. Change the position of the protect switch.

•The memory card is full. Erase images ( 122) or insert a new memory card.

•The power source is not properly connected, or the battery pack is exhausted or not properly

attached ( 16-17, 137).

•The function cannot be used in that recording

program ( 52).

•The memory card is not loaded ( 115).

•You are using an SD Memory Card and it is set for erasure prevention. Change the position of the protect switch.

•The memory card is full. Erase images ( 122) or insert a new memory card.

•You have reached the maximum file number. Set the file numbering to RESET through the menu

( 117) and insert a new memory card.

•You are using an unformatted memory card.

Format the card ( 133).

•The image is protected ( 122).

•You are using an SD Memory Card and it is set for erasure prevention. Change the position of the protect switch.

Information

Additional

145