34Playback 
NOTES
If there are blank sections between recordings, the zero set memory may not work correctly.
Locating the End of the Last Scene
After playing back a tape, use this function to locate the end of the last scene recorded in order to continue recording from that point.
POINTS TO CHECK
Stop the playback before using this function.
FUNC.
1 Press FUNC. .
2Select (
) [
END SEARCH] and press (
).
3Select (
) [EXECUTE] and press ( 
).
•“END SEARCH” appears.
•The camcorder rewinds/fast forwards the tape, plays back the last few seconds of the recording and stops the tape.
•To cancel the search push the joystick (
) towards 
.
NOTES
End search cannot be used once you remove the cassette.
If there are blank sections between recordings, the end search may not work correctly.
You cannot use the end search to locate the end of a scene that was audio dubbed.
Locating Scenes by Recording Date
You can locate the change of the date/ time zone with the date search function.
Press 
or 
on the wireless controller.
•Press more than once to search for further date changes (up to 10 times).
•To cancel the search press STOP
.
NOTES
Recordings shorter than 1 minute per date/ time zone cannot be located with this function.
Date search may not function if the data code is not correctly displayed.
Playing Back Still Images and Movie Clips from a Memory Card
(
10)
1Holding the lock button pressed
down, set the 
switch to PLAY.