74Connecting to a Printer

Printing after Changing the Print Settings

1 Press P.SET .

•The print setting menu appears.

•Depending on the printer, the message “BUSY.” may appear before the camcorder displays the print setting menu.

2In the print settings menu, select(, ) the setting you want to change and press ( ).3Select () the desired setting option and press ( ).4Select () [PRINT] and press ( ).

•Printing starts. The print setting menu disappears when the printing is completed.

•To continue printing, select another still image.

TO CANCEL THE PRINTING

Press ( ) while printing. A confirmation dialog appears. Select [OK] and press ( ). With Canon’s PictBridge compatible printers, the printing will stop immediately (even if not completed) and the paper will be fed through.

PRINTING ERRORS

If an error occurs during the printing process, an error message appears ( 81).

-Canon’s PictBridge compatible printers: Resolve the error. When printing does not resume automatically, select [CONTINUE] and

press ( ). If [CONTINUE] cannot be selected, select [STOP], press ( ) and retry printing.

Refer also to the printer’s instruction manual for details.

-If the error still persists and printing does not restart, disconnect the USB cable and turn off the camcorder and the printer. After a short while, turn them on again, set the camcorder to mode and restore the connection.

WHEN YOU HAVE FINISHED PRINTING

Disconnect the cable from the camcorder and printer and turn off the camcorder.

IMPORTANT

The following still images may not be correctly printed with a PictBridge compatible printer.

-Images created or changed on a computer and transferred to the memory card.

-Images recorded with the camcorder but edited on a computer.

-Images whose file names were changed.

-Images not recorded with this camcorder. Observe the following precautions during

printing:

-Do not turn off the camcorder or the printer.

-Do not change the position of the / switch.

-Do not disconnect the USB cable.

-Do not remove the memory card.

If the message “BUSY.” does not disappear, disconnect the USB cable and restore the connection after a short while.