Under default settings, [Scan First] is assigned to the START button on the operation panel.
When “Ready” appears on the display panel, press the START button after placing your document in the scanner. CaptureOnTouch starts up and [Scan First] begins. When document scanning is finished, the output method selection screen appears. Perform the procedure from step 5 onward to output the scanned images.
START Button
Hint
If “Ready” does not appear on the display panel (for example, the job title of a previous scan job will remain on the display after you perform the job), you can make it appear by pressing the STOP button.
Select the mode for scanning documents (auto color detection, color, grayscale, or black and white (binary)).
[Page Size]Specify the page size of documents.[Orientation]Specify the orientation in which documents are fed into the scanner (portrait or landscape).
Specify whether to scan only one side of a document or both sides. If you select [Skip blank page] and a blank page is detected within the document while scanning, the blank page is skipped.
[Deskew]When a document is scanned at an angle, the slant is detected and straightened in the scanned image.
[Text orientation recognition]The orientation of text in scanned images is detected, and the images are rotated to match the orientation of the text.
[Use advanced settings dialog box]Open the ISIS/TWAIN driver settings screen, and configure advanced scan conditions. For details on the settings in the driver settings screen, refer to the Help. (Click the [Help] button in the settings screen to open the Help.)
IMPORTANT
Certain settings are found in both the ISIS/TWAIN driver settings screen and the CaptureOnTouch scanner settings. If you clear the [Use advanced settings dialog box] check box after configuring ISIS/TWAIN driver settings, the CaptureOnTouch scanner settings are enabled.
23