Installing the Software

Connecting to a Computer

Before Installation

●Do not connect the scanner to the computer before installing the software.

●Log on to Windows as an Administrator.

●Close all other applications before installing the software.

If you connect the scanner and turn it ON before you install the software, the following wizard screen will appear. If this wizard is displayed, click the [Cancel] button to exit the wizard, and turn the scanner OFF.

1

3

Insert the Setup Disc into the computer’s CD-ROM drive.

The setup menu automatically starts up when you insert the CD-ROM into the drive. (If the menu does not start up, execute setup.exe from the CD-ROM.)

Click [Install].
For Windows Vista

If the following screen appears, enter the current administrator password and click [OK].

4

Follow the instructions on the

screen to complete installation.

2

5

Click [Typical Installation].Click [Exit] to close the setup menu.

Turning the Scanner ON

The plug-and-play function recognizes the scanner, and the device driver is automatically installed.

Power indicator

Power button

PC Power Link Function

The scanner’s power can be linked to the computer, allowing it to be turned ON/ OFF in accordance with the computer. When you enable this function and turn ON the computer to which the scanner is connected, the scanner automatically turns ON.

Under default settings, this function is disabled. To enable this function, display the scanner’s properties from [Scanners and Cameras] in the Control Panel. For details, refer to the User Manual.

This completes setup.