Manuals / Brands / Computer Equipment / Scanner / Canon / Computer Equipment / Scanner

Canon DR-2510C Placing Cards, Chapter 2 Basic Operation, Feeding in the Bypass Mode

1 46

Download 46 pages, 3.18 Mb

Chapter 2 Basic Operation

Feeding in the Bypass Mode

When scanning multiple page documents that are fastened together, such as invoices, place the documents so that the edge that is fastened together is facing down.

1Switch the feed selection lever to (Bypass).

IMPORTANT

After you finish scanning, close the document feed tray and the document eject tray to prevent damage to the scanner while it is not being used.

Placing Cards

1	2
	Switch the feed selection lever to (Bypass).

Adjust the document guides to fit the width of the document to be scanned (See p.12).

Place the document with the reverse side facing you, and the top of the document facing down (See p.12).

CAUTION

When scanning cards, make sure to set the feed selection lever to (Bypass), and scan the cards one at a time.

2Adjust the document guides to fit the width of the card to be scanned (See p.12).

- 14 -

Contents

Page NTRODUCTIO ONTENTS Chapter 1 Before Using the Scanner AC Adapter Moving the Scanner Handling Disposal The main features of the DR-2010C/DR-2510Cdocument scanner are described below „Compact Size „Fast Document Feeding „High Image Quality „Auto Color Detection „Folio Scan „Deskew „Ultrasonic Double Feed Detection (for the DR-2510Conly) „Text Enhancement Modes „Back View „Front View/Right-SideView „Feed Selection Lever „Front View (With the Document Feed Tray and Eject Tray Open) „Paper Eject Stopper 44..ScannerScannerSystemSystemRequirementsRequirements Setup Disk Chapter 2 Basic Operation A document must meet the following criteria to be scannable: so that they cover the entire span of the feed rollers are fed one sheet at a time Card it 22..PreparingPreparingthetheScannerScanner Preparing the Document Feed Tray Preparing the Document Eject Tray Preparing the Document Stopper Placing Page Feeding in the Bypass Mode Placing Cards Placing Folded Documents Scanning Methods •Scan Page •Scan Job Scanning with the Job Function The following three functions can be registered in a job button •Save as File Scan Panel Functions Enhancing the Text of a Document Scanning Different Sized Documents Together Skipping Blank Pages Scanning (Single-Sided)11" X 17"/A3 Documents Deskewing Documents Moire Reduction Correcting the Text Orientation of Documents Reducing Bleed Through for Thin Documents and Documents with Dark Reverse Sides Enhancing the Red color for Black-and-WhiteScanning Practical Examples Scanning Both Sides of Pages Scanning Non-StandardSize Documents Scanning Multiple Batches as One Document Prescan Registering Settings Page Other Functions Page Chapter 3 Appendix Regular Maintenance Cleaning the Sensor Glass and the Rollers the sensor glass or rollers inside the scanner may be dirty. Clean them periodically Page Removing the Feeding Roller Attaching the Feeding Roller Removing the Retard Roller Attaching the Retard Roller Removing the Document Holding Guide Attaching the Document Holding Guide Resetting the Counter the counter Control Panel (Category View) Control Panel (Classic View) Troubleshooting ⋅The Scanner Does Not Turn ON ⋅The Scanner Is Not Recognized ⋅Slow Scanning Speed ⋅Scanning Is Not Performed ⋅Documents Do Not Feed Properly ⋅Saved Image Files Do Not Open ⋅Scanning Results Are Not as Expected Specifications Main Unit AC Adapter (100 to 240 V type) Replacement Parts Exchange roller kit (product code: 2445B001) External Dimensions FCC REGULATIONS (For 120 V model) RADIO INTERFERENCE REGULATIONS (For 120 V models) RÈGLEMENT SUR LE BROUILLAGE RADIOÉLECTRIQUE (For 120 V models) European Union (and EEA) only MODEL NAMES INDEX