Manuals / Brands / Computer Equipment / Scanner / Canon / Computer Equipment / Scanner

Canon DR-2510C periodically, Chapter 3 Appendix, Cleaning the Sensor Glass and the Rollers, the sensor glass or rollers inside the scanner may be dirty. Clean them

1 46

Download 46 pages, 3.18 Mb

Chapter 3 Appendix

Cleaning the Sensor Glass and the Rollers		4	Use a clean dry cloth to wipe dirt off the sensor glass.
Cleaning the Sensor Glass and the Rollers			Use a clean dry cloth to wipe dirt off the sensor glass.
If scanned images contain streaks, or if the scanned documents become dirty,
the sensor glass or rollers inside the scanner may be dirty. Clean them
periodically.			Scanning Glass
			Scanning Glass
1	Open the document feed tray (See p. 11).
2	Press the OPEN knob from both sides (c), and pull the front unit out and
2	downward to open it (d).		Wipe both the front and back sensor glasses.

d

c

3Use compressed air to remove dust and paper particles from the inside of the scanner.

CAUTION

Do not spray water or neutral detergent directly on the scanner. Precision mechanisms, such as the light source, may get wet, and cause a malfunction.

IMPORTANT

Scratches on the sensor glass may cause marks on the images, as well as feeding errors. If there are scratches on the sensor glass, contact your local authorized Canon dealer or service representative.

5Clean the c rollers by wiping the exposed part without turning them.

Retard roller

c d

Feeding roller

Clean the d rollers while turning them. Wipe the rollers with a cloth that has been dampened with water and thoroughly wrung out, and then use a dry, soft cloth to wipe away any moisture.

- 27 -

Contents

Page NTRODUCTIO ONTENTS Chapter 1 Before Using the Scanner AC Adapter Moving the Scanner Handling Disposal The main features of the DR-2010C/DR-2510Cdocument scanner are described below „Compact Size „Fast Document Feeding „High Image Quality „Auto Color Detection „Folio Scan „Deskew „Ultrasonic Double Feed Detection (for the DR-2510Conly) „Text Enhancement Modes „Back View „Front View/Right-SideView „Feed Selection Lever „Front View (With the Document Feed Tray and Eject Tray Open) „Paper Eject Stopper 44..ScannerScannerSystemSystemRequirementsRequirements Setup Disk Chapter 2 Basic Operation A document must meet the following criteria to be scannable: so that they cover the entire span of the feed rollers are fed one sheet at a time Card it 22..PreparingPreparingthetheScannerScanner Preparing the Document Feed Tray Preparing the Document Eject Tray Preparing the Document Stopper Placing Page Feeding in the Bypass Mode Placing Cards Placing Folded Documents Scanning Methods •Scan Page •Scan Job Scanning with the Job Function The following three functions can be registered in a job button •Save as File Scan Panel Functions Enhancing the Text of a Document Scanning Different Sized Documents Together Skipping Blank Pages Scanning (Single-Sided)11" X 17"/A3 Documents Deskewing Documents Moire Reduction Correcting the Text Orientation of Documents Reducing Bleed Through for Thin Documents and Documents with Dark Reverse Sides Enhancing the Red color for Black-and-WhiteScanning Practical Examples Scanning Both Sides of Pages Scanning Non-StandardSize Documents Scanning Multiple Batches as One Document Prescan Registering Settings Page Other Functions Page Chapter 3 Appendix Regular Maintenance Cleaning the Sensor Glass and the Rollers the sensor glass or rollers inside the scanner may be dirty. Clean them periodically Page Removing the Feeding Roller Attaching the Feeding Roller Removing the Retard Roller Attaching the Retard Roller Removing the Document Holding Guide Attaching the Document Holding Guide Resetting the Counter the counter Control Panel (Category View) Control Panel (Classic View) Troubleshooting ⋅The Scanner Does Not Turn ON ⋅The Scanner Is Not Recognized ⋅Slow Scanning Speed ⋅Scanning Is Not Performed ⋅Documents Do Not Feed Properly ⋅Saved Image Files Do Not Open ⋅Scanning Results Are Not as Expected Specifications Main Unit AC Adapter (100 to 240 V type) Replacement Parts Exchange roller kit (product code: 2445B001) External Dimensions FCC REGULATIONS (For 120 V model) RADIO INTERFERENCE REGULATIONS (For 120 V models) RÈGLEMENT SUR LE BROUILLAGE RADIOÉLECTRIQUE (For 120 V models) European Union (and EEA) only MODEL NAMES INDEX