1. Important Safety Instructions
To ensure the safe operation of this scanner, be sure to read the safety warnings and precautions described below.
Installation Location
The performance of this scanner is affected by the environment in which it is installed. Make sure that the location where the scanner is installed meets the following environmental requirements.
• Provide adequate space around the scanner for operation and maintenance.
| At least 3.9" (100 mm) |
| when eject tray is empty. |
17.7" (450 mm) |
|
when the document |
|
feed tray and | 29.5" (750 mm) |
document feed tray | |
extension are | when the document |
closed. | feed tray and |
| document feed tray |
| extension are |
| open. |
•If scanned documents are ejected to the back of the scanner, provide adequate space behind the scanner for documents ejected after being scanned. (See “Document Eject Tray,” on p. 23.)
•Avoid installing the machine in direct sunlight. If this is unavoidable, use curtains to shade the scanner.
•Avoid locations where a considerable amount of dust accumulates.
•Avoid warm or humid locations, such as in the vicinity of a water faucet, water heater, or humidifier, and avoid locations where the fumes from ammonia, paint thinner, or other volatile chemicals may be present.
•Avoid locations where ammonia gas is emitted.
•Avoid locations near volatile or flammable materials, such as alcohol or paint thinner.
•Avoid locations that are subject to vibration.
•Avoid exposing the scanner to rapid changes in temperature. If the room in which the scanner is installed is cold but rapidly heated, water droplets (condensation) may form inside the scanner. This may result in a noticeable degradation in scanning quality.
6Chapter 1