•When scanning a page with a dark area at the left or right edge

•When scanning a glossy or reflective document

•When the brightness setting is incorrect

•When Custom setting is selected in the Gamma Settings dialog box

☞Depending on the application program, operation may become unstable when [Auto-detection] is enabled. In that case, [Auto-detection] should be disabled.

Dots per inch

Select the scanning resolution.

☞Higher resolutions provide clearer images, but produce larger files.

☞When the selected resolution is 300 dpi or less, the [Moire Reduction] setting is enabled to allow reduction of Moire patterns in scanned images.

☞When the selected resolution is 400 or 600 dpi, the [Image Quality] setting is enabled.

Scanning Side

Select which page side(s) to scan.

[Simplex]

Scan only the front (top) side of documents loaded at the feeder inlet.

[Duplex]

Scan both sides of documents.

[Skip Blank Page]

As each document page is scanned, its scanned image is judged as to whether it is blank, and if so, the image is not saved.

☞Selecting [Skip Blank Page] enables the [Setting] button, which opens the [Blank Skip Setting] dialog box.

☞Adjust the [Content density] setting in the [Blank Skip Setting] dialog box if blank pages are not skipped, or if non-blank pages are skipped.

English

Software Setup

69