•When you are in the vicinity of an access point that you have previously connected to, the camera will automatically connect to it in step 3. To change access points, select [Switch Network] from the screen that will be displayed when the connection is being established, and follow steps 4 – 5 in “Adding a Computer” (=121).
•You can connect to computers that you have already connected to by choosing them on the [Select a Device] screen in step 3.
•If you chose [PIN Method] in step 5, a PIN code will be displayed on the screen. Be sure to set this code in the access point. Choose a device in the [Select a Device] screen. For further details, refer to the user guide included with your access point.
•To add multiple computers, repeat the above procedures starting from step 1.
•To disconnect from the camera, turn off the camera.
•After you have accessed the
If you prefer not to display recent target devices, press the <n> button, and on the [3] tab, choose
Connecting to Access Points in the List1View the listed access points.
zzView the listed networks (access points) as described in steps 1 – 3 of “Adding a Computer” (=120).
2Choose an access point.
zzPress the <o><p> buttons to choose a network (access point), and then press the <m> button.
3Enter the access point’s encryption key.
zzPress the <m> button to access the keyboard, and then enter the encryption key (=111).
zzPress the <o><p> buttons to choose [Next], and then press the <m> button.
4Choose [Auto].
zzPress the <o><p> buttons to choose [Auto], and then press the <m> button.
XXA list of other devices connected to the access point will appear in the [Select a Device] screen.
Cover
Preliminary Notes and
Legal Information
Contents: Basic
Operations
Basic Guide
Advanced Guide
1 Camera Basics
2 Auto Mode/Hybrid
Auto Mode
3 Other Shooting
Modes
4 P Mode
5 Playback Mode
6
7 Setting Menu
8 Accessories
9 Appendix
Index
122