Still Images

Movies

Customizing the Self-Timer

You can specify the delay (0 – 30 seconds) and number of shots (1 – 10).

1Choose [$].

zzFollowing step 1 in “Using the Self-Timer” (=39), choose [$] and press the <n> button.

2Configure the setting.

zzPress the <o><p> buttons to choose [Delay] or [Shots].

zzPress the <q><r> buttons to choose a value, and then press the <m> button.

XXOnce the setting is complete, [$] is displayed.

zzFollow step 2 in “Using the Self-Timer” (=39) to shoot.

•For movies shot using the self-timer, [Delay] represents the delay

before recording begins, but the [Shots] setting has no effect.

• When you specify multiple shots, image brightness and white balance are determined by the first shot. More time is required between shots when the flash fires or when you have specified to take many shots. Shooting will stop automatically when the memory card becomes full.

•When a delay longer than two seconds is specified, two seconds before the shot, the lamp blinking and self-timer sound will speed up. (The lamp will remain lit in case the flash fires.)

Still Images

Deactivating the Flash

Prepare the camera for shooting without the flash as follows.

Configure the setting.

zzPress the <r> button, press the <q><r> buttons to choose [!], and then press the <m> button.

XXOnce the setting is complete, [!] is displayed.

zzTo restore the original setting, repeat this process but choose [].

•If a flashing [] icon is displayed when you press the shutter button

halfway in low-light conditions, mount the camera on a tripod or take other measures to keep it still.

Cover

Preliminary Notes and

Legal Information

Contents: Basic

Operations

Basic Guide

Advanced Guide

1 Camera Basics

2 Auto Mode/Hybrid

Auto Mode

3 Other Shooting

Modes

4 P Mode

5 Playback Mode

6 Wi-Fi Functions

7 Setting Menu

8 Accessories

9 Appendix

Index

40