En gli sh
Basic Functions
Switching on/to standby and | Sound control | |||
selecting functions | ● On the set, Press DBB (Dynamic Bass | |||
| ||||
1 Press POWER to switch on (or .POWER ON | Boost) once or more to turn bass | |||
on the remote control). | enhancement on or off . | |||
➜ The POWER indicator lights up |
|
|
| |
➜ The system switches to the last source | Helpful hints: | |||
selected. | – Some discs or tapes might be recorded in high | |||
2 To select your function, push FUNCTION to | modulation, which causes a distortion at high | |||
volume. If this occurs, switch off DBB or reduce | ||||
TUNER, TAPE or CD. | ||||
the volume. | ||||
3 Press POWER to switch the system to standby. | ||||
|
|
| ||
|
|
|
| |
|
|
|
| |
Volume control
1Check the system is switched on.
2Adjust the volume with VOLUME control.
Helpful hints:
–In the standby mode, the volume level will be retained in the system’s memory.
IMPORTANT!
–Adjust the volume to a moderate level before you switch the system to standby mode or plug in the headphones.
Reset
If desired, you can restore your system to its default setting.
1Remove the power plug from the wall socket.
2Use a ballpoint pen to press the RESET for more than 30 seconds.
3Reconnect the power plug .
➜ The system is restored to its default setting.
14
