CD Operation
Discs for playback
This system can playback all digital audio CD, finalized digital audio
IMPORTANT!
–This system is designed for regular discs. Therefore, do not use any accessories such as disc stabilizer rings or disc treatment sheets, etc., which may jam the changer mechanism.
–Do not load more than one disc into each tray.
–CDs encoded with copyright protection technologies by some record companies may be unplayable by this system.
Playing discs
1Press POWER to on, then push FUNCTION to CD.
2Press OPEN/CLOSE to open the disc trays., and load your discs in the two trays.
2 | 3 |
| 1 |
| C D C H A N G E R |
2 | 1 |
●To load a third disc, press DISC CHANGE (on the remote control) to rotate the disc trays.
Helpful hints:
– Make sure the disc label is facing up.
3Press OPEN/CLOSE to close the disc trays.,
➜A lighted DISC button indicates that a disc is being read in the disc tray.
➜Display shows:
4PressÉÅ to start playback.
➜ Display shows: current track number.
01
●To start playback from a selected disc tray, press DISC 1, 2 or 3.
5To pause playback, pressÉÅ.
PressÉÅ again to resume playback.
6To stop playback, press STOPÇ.
7To remove the disc, press OPEN/CLOSE to
open the disc trays.
●If necessary, press DISC CHANGE (on the remote control) to rotate the disc trays.
Helpful hints: CD playback will also stop when:
– you select TUNER or TAPE.
Selecting and searching
Selecting a different track
●Briefly press 4 or ¢ once or several times to skip to the beginning of the current, previous or subsequent track.
or
Use the digit keys on the remote control to select the track number directly. e.g.
Track 2: Press 2
Track 10: Press +10,
Track 12: Press +10 and then, 2
Track 22: Press +10, +10 and then, 2.
●In the pause/stop position, press ÉÅ to start playback.
➜ Playback of selected track starts.
English
15
