Canon EOS40D Recharging the Battery, Remove the cover, Attach the battery, For CB-5L

Recharging the Battery

1 Remove the cover.

When you remove the battery from the camera, be sure to reattach the cover to protect against short circuiting.

2

Battery pack slot index

CG-5803

CB-5L

Recharge Level	Charge Lamp
0 - 50%	Blinks once per second
50 - 75%	Blinks twice per second
75 - 90%	Blinks three times
	per second
90% or higher	Lights on

Attach the battery.

Align the battery’s front edge with the battery charger’s index line. While pressing down the battery, slide it in the direction of the arrow.

To detach the battery, follow the above procedure in reverse.

Recharge the battery.

For CG-580

As shown by the arrow, flip out the battery charger’s prongs and insert the prongs into a power outlet.

For CB-5L

Connect the power cord to the charger and insert the plug into the power outlet.

XRecharging starts automatically and the charge lamp starts blinking in red.

XThe recharging time for a completely exhausted battery is as follows: BP-511A and BP-514: Approx. 100 min. BP-511 and BP-512: Approx. 90 min. The time required to recharge the battery depends on the ambient temperature and battery’s charge level.

The numbers and markings on the battery charger correspond to the table on the left.

24