FUsing a Remote Switch

You can connect the Remote Switch RS-80N3, Timer Remote Controller TC-80N3 (both sold separately), or any EOS accessory equipped with an N3-type terminal to the camera for shooting (p.354). To operate the accessory, refer to its instruction manual.

1 Open the terminal cover.

2Connect the plug to the remote control terminal.

Connect the plug as shown in the illustration.

To disconnect the plug, grasp the silver part and pull.

RRemote Control Shooting

With Remote Controller RC-6 (sold separately), you can shoot remotely up to approx. 5 meters/16.4 feet from the camera. You can either shoot immediately or use a 2-sec. delay.

You can also use Remote Controller RC-1 and RC-5.

1Focus the subject.

2Set the lens focus mode switch to <MF>.

You can also shoot with <f>.

167