3Setting the FlashN

Flash Custom Function Settings

For details on the Speedlite’s Custom Functions, refer to the Speedlite’s instruction manual.

1

2

Clear Settings

1

2

Select [Flash C.Fn settings].

Select [Flash C.Fn settings], then press <0>.

Set the functions.

Press the <U> key to select the number, then press <0>.

Select the setting, then press <0>.

Select [Clear settings].

Under the [z2: External Speedlite control] tab, select [Clear settings], then press <0>.

Select the settings to be cleared.

Select either [Clear flash settings] or [Clear all Speedlite C.Fn’s], then press <0>.

When you select [OK], the respective flash settings will be cleared.

With an EX-series Speedlite, if the [Flash metering mode] Custom Function is set to [TTL] (autoflash), the Speedlite will always fire at full output.

The Speedlite’s Personal Functions (P.Fn) cannot be set or canceled with the camera’s [External Speedlite control] screen. Set it with the Speedlite.

177