3Custom Function SettingsN

C.Fn III -3 Multi function lock

When the <R> switch is set to the right, it will prevent the <6>, <5> dail, and <9> from accidentally changing a setting.

Select the camera control you want to lock, then press <0> to append a checkmark <X> and select [OK].

6Main Dial

5Quick Control Dial

9Multi-controller

If the <R> switch is set and you try to use one of the locked camera controls, <L> will be displayed in the viewfinder and on the LCD panel. Also, on the shooting function settings display (p.48), [LOCK] will be displayed.

By default, when the <R> switch is set to the right, the <5> dial will be locked.

C.Fn III -4 Warnings ! in viewfinder

When any of the following functions are set, the <h> icon can be displayed on the lower left in the viewfinder (p.23).

Select the function for which you want the warning icon to appear, press <0> to append a <X>, then select [OK]. When this is set, the <> icon will also appear for shooting function settings (p.48).

When monochrome Vis set

If the Picture Style is set to [Monochrome] (p.113), the warning icon will appear.

When WB is corrected

If white balance correction (p.123) is set, the warning icon will appear.

When ISO expansion is used

If the ISO speed is set manually to L (50), H1 (51200), or H2 (102400) (p.107), the warning icon will appear.

When spot metering is set

If the metering mode is set to [Spot metering] (p.150), the warning icon will appear.

C.Fn III -5 Custom Controls

You can assign often-used functions to camera buttons or dials according to your preferences. For details, see page 320.

313