26
Load a fully charged Battery Pack LP-E5 into the camera.
1Open the battery compartment
cover.
Slide the lever as shown by the arrow
and open the cover.
2Insert the battery.
Insert the end with the battery
contacts.
Insert the battery until it locks in
place.
3Close the cover.
Press the cover until it snaps shut.
Open the cover and remove the
battery.
Press the battery lock lever as shown
by the arrow and remove the battery.
To prevent shorting, be sure to attach
the protective cover to the battery.

Installing and Removing the Battery

Installing the Battery
Removing the Battery
After opening the battery compartment cover, be careful not to swing it back
further. Otherwise, the hinge might break.