Canon EOS 1000D instruction manual Set the printing effects, 138, Screen display may differ

wPrinting

	4 Set the printing effects.
	Set as necessary. If you need not set
	any printing effects, go to step 5.
	The screen display may differ
	depending on the printer.
	Select the option on the upper right,
	then press <0>. Select the desired
	printing effect, then press <0>.
	If the <e> icon is displayed next to
	<z>, you can also adjust the
	printing effect. (p.140)
Printing Effect	Description
EOff	Same as the printing characteristics turned “On”. No automatic
	correction will be performed.
EOn	The image will be printed according to the printer’s standard
	colors. The image’s Exif data is used to make automatic
	corrections.
EVivid	The image will be printed with higher saturation to produce
	more vivid blues and greens.
ENR	The image noise is reduced before printing.
EFacek	Effective in backlit conditions which can make the subject’s
	face look dark. The face will be brightened for printing.
ERed-Eye1	Effective in flash images where the subject has red eye. The
	red eye is corrected before printing.
0B/W	Prints in black-and-white with true blacks.
0Cool tone	Prints in black-and-white with cool, bluish blacks.
0Warm tone	Prints in black-and-white with warm, yellowish blacks.
zNatural	Prints the image in the actual colors and contrast. No automatic
	color adjustments will be applied.
zNatural M	The printing characteristics are the same as the “Natural”
	setting. However, this setting enables finer printing adjustments
	than with “Natural.”
EDefault	The printing will differ depending on the printer. For details, see
	the printer’s instruction manual.

138