Installing and Removing the Card, Insert the Card

Installing and Removing the Card

The captured image is recorded onto the card (sold separately).

Make sure the card’s write protect switch is set upward to enable writing/erasing.

Installing the Card

1 Open the cover.

Slide the cover as shown by the arrow to open it.

Card’s write protect switch

Shots remaining

Insert the Card.

As shown by the illustration, face the card’s label side toward you and insert it until it clicks in place.

Close the cover.

Close the cover and slide it in the direction shown by the arrow until it snaps shut.

When you set the power switch to <1>, the number of remaining shots will be displayed on the LCD monitor.

The shots remaining depends on the remaining capacity of the card, image-recording quality, ISO speed, etc.

The [1Shoot w/o card] menu option set to [Off] will prevent you from forgetting to install a card. (p.108)

Page 31

Image 31

Canon EOS 1000D instruction manual Installing and Removing the Card, Installing the Card Open the cover, Insert the Card

Contents

English Copyrights Test the Camera Before Using and Liability Pocket Guide Item Check ListBe careful not to lose any of the above items Camera Indicates the Main Dial Conventions Used in this ManualIcons in this Manual Basic Assumptions Chapters Contents More Advanced Techniques Advanced Shooting TechniquesLive View Shooting 123 Handy FeaturesImage Playback 107 Customizing the Camera 151 133Reference 161 Contents at a Glance Playback FocusingPrinting Camera Care Handling Precautions Cards LCD MonitorLens Electrical Contacts Quick Start Guide Take the picture. p.37 Set the Mode Dial to 1 FullAuto. p.44 Focus the subject. p.37 EF-S 18-55mm f/3.5-5.6 is / II lens Nomenclature Nomenclature Shutter speed Shooting Settings Display Viewfinder Information Basic Zone Mode DialCreative Zone AE p.76 Battery Charger LC-E5E Battery Charger LC-E5 Attaching the Strap Getting Started As shown in the illustration, attach the battery securely Recharging the BatteryRemove the protective cover Attach the battery Recharge the battery. For LC-E5 Purchase a new battery Tips for Using the Battery and Charger Installing and Removing the Battery About the Automatic Self-Cleaning Sensor Turning on the PowerAbout Auto Power Off Battery Life Checking the Battery LevelTemperature Shooting Conditions Set the date and time 3Setting the Date and TimeDisplay the menu UnderTime. the 6 tab, select Date Under the 6 tab, select Language 3Selecting the Interface Language Captured image is recorded onto the card sold separately Installing and Removing the CardInstalling the Card Open the cover Insert the Card Removing the Card Make sure the access lamp is off, then open the coverRemove the card Attach the lens On the lens, set the focus mode switch to AF autofocusMounting and Detaching a Lens Mounting a Lens Remove the caps Image Conversion Factor About ZoomingTo zoom, turn the zoom ring on the lens with your fingers Turn the lens until it stops, then detach it Take the picture Set the is switch toAbout the Lens Image Stabilizer Press the shutter button halfway Holding the Camera Basic Operation This releases the shutter and takes the picture Shutter ButtonPressing halfway Pressing completely Basic Zone Mode Menu Screen Menu Operations and SettingsCreative Zone Mode Menu Screen Select a tab Menu Setting Procedure Display the menuSelect the setting Set the desired setting Under the 5 tab, select Format, then press 3Formatting the CardSelect Format Format the card About Low-level Formatting Shooting Settings Switching the LCD Monitor ScreenMenus Captured Image About the Auto Lighting Optimizer ZoneFull Auto AF point 2 Aim any AF point over Subject 1Fully Automatic ShootingFocus the subject Although it is daylight, the flash popped up Sometimes multiple AF points flash simultaneouslyLow light, the built-in flash fired a series of flashes Recomposing the Shot 1Full Auto TechniquesShooting a Moving Subject Focus the face 2Shooting PortraitsShooting Tips Use a telephoto lens With a zoom lens, use the wide-angle end 3Shooting LandscapesShooting night scenes Move to the subject as close as possible 4Shooting Close-upsUse a simple background Simple background makes the flower, etc., stand out better Use the center AF point to focus 5Shooting Moving Subjects Use a wide-angle lens and a tripod 6Shooting Portraits at Night Taking portraits without flash 7Disabling Flash Press the Yij button Select the self-timer Using the Self-timer Playback the image XImage PlaybackSelect the image Advanced Shooting Techniques Program can be shifted. Program shift Set the Mode Dial to d Take the pictureChanging the ISO speed and using the built-in flash Program AE ISO Speed Guide Changing the ISO SpeedNPress the Z button Select the ISO speed Press the D button DUsing the Built-in FlashEffective Flash Range Bright light, decrease the ISO speed 3Using Red-eye ReductionIf the subject is far away, increase the ISO speed By increasing the ISO speed, you can extend the flash range Changing the AF ModeN Select the AF modePress the ZE button Press the S button SSelecting the AF PointNSelect the AF point Set the lens focus mode switch to Manual Focusing For still subjects IContinuous ShootingNPress the Yij button Select Jpeg Max. approx shots/sec Select the image-recording quality 3Setting the Image-recording QualityGuide to Image-recording Quality Settings Select Quality What’s the difference between 7and 8? When do I use the 1mode? About 1+73 About Picture Style Effects ASelecting a Picture StyleNPress the XA button Select a Picture Style For black-and-white images NeutralFaithful Monochrome About the Main Dial Pointer More Advanced Techniques Action Shots Set the Mode Dial to s Set the desired shutter speedAbout the Shutter Speed Display Use a fast shutter speed such as 1/4000 sec. to 1/500 sec Using the built-in flashHow to blur a flowing river or water fountain To freeze the action or moving subject Changing the Depth of Field Set the Mode Dial to f Set the desired apertureAbout the Aperture Display Changing the Depth of Field Depth-of-Field PreviewN Bulb Exposures Set the Mode Dial to aManual Exposure Set the exposure and take the picture Automatic Depth-of-Field AE Set the Mode Dial to Focus the subject QChanging the Metering ModeN Select the metering modePress the WQ button Making it darker Setting Exposure CompensationNOSetting Exposure Compensation Making it brighter Under the 2 tab, select Flash exp comp, then press After setting the flash exposure compensation amount, pressYFlash Exposure CompensationN Select Flash exp comp Under the 2 tab, select AEB, then press 3Auto Exposure BracketingNSelect AEB Set the AEB amount Using AEB with exposure compensation Canceling AEBUsing AEB with continuous shooting Using AEB with u single shooting Set the parameter ACustomizing the Picture StyleNSelect Picture Style Select a parameter Color tone Skin tones can be adjusted Parameter Settings and EffectsSharpness Adjusts the sharpness of the image Saturation Image’s color saturation can be adjusted Filter Sample Effects Monochrome AdjustmentFilter Effect Toning Effect Select the base Picture Style ARegistering the Picture StyleNSelect User Def Press ARegistering the Picture StyleN Select Color space 3Setting the Color SpaceNAbout Adobe RGB Press the a button AAE LockNAE Lock Effects Press the D button to pop-up the built-in flash AFE LockNFocus the subject Press the a button OCustom White Balance Setting the White BalanceNPress the B button Select the white balance Import the white balance data Select Custom WBPress the B button Press the U key to select O, then press White Balance Correction 3White Balance CorrectionNSet the white balance correction Set the white balance bracketing amount White Balance Auto BracketingBracketing Sequence Preventing Camera ShakeN Using the self-timer l with mirror lockup About Remote Live View Shooting Live View Shooting Select Live View shoot Set the shooting modeSelect Live View function settings Preparing for Live View ShootingNPage Magnify the image Focusing ManuallyNMove the focusing frame to Position where you want to focus Exit Live View shooting About the Shooting SettingsShootingN Check the exposure 100 Battery Life with Live View Shooting 101 About the Information Display Fn-7-1 Quick mode Using AF to FocusN102 103 Return to the Live View image display and shoot Set to Live mode and the lens focus mode switch to f Fn-7-2 Live mode104 105 About the AF point with Live mode 106 107 Handy Features 3Card Reminder Handy Features3Setting the Image Review Time 3Silencing the Beeper 3Setting the LCD Monitor Brightness Setting the Auto Power-off Time109 110 3File Numbering MethodsFile numbering after replacing the card Card -1Card 111 Personal computer 3Auto Image Rotation112 OnD Settings Display BChecking Camera Function Settings113 Select OK 3Reverting the Camera to the Default SettingsNSelect Clear settings Select the desired setting 115 3Setting the LCD Monitor Off/On3Changing the Shooting Settings Screen Color Select Screen color Flash firing Built-in flash func. setting3Flash ControlN Select Flash control External flash func. setting External flash C.Fn setting Setting the External Speedlites117 Disabling Automatic Sensor Cleaning 3Automatic Sensor CleaningCleaning the Sensor Now Select Clean nowf 119 3Appending Dust Delete DataNPreparation Obtain the Dust Delete Data Select Dust Delete Data 120 About the Dust Delete DataSelect OK, and the menu will reappear End the cleaning 3Manual Sensor CleaningNSelect Sensor cleaning Select Clean manually 122 About images taken with another camera 123 HDisplay Multiple Images on One Screen Index display XSearching for Images Quickly124 125 Jump through Images Jump displaySelect the jump method Browse by jumping Select the image and rotate it YMagnified ViewBRotating the Image Select Rotate Stop the auto play 3Auto PlaybackSelect Auto play Start the auto play 128 Viewing the Images on TV 129 KProtecting ImagesSelect Protect images Select the image and protect it 3Erasing All Images in the Card LErasing ImagesErase the image 3Checkmarking X Images to be Erased in a Batch 131 BShooting Information DisplayAbout the Highlight Alert RGB Display 132About the Histogram Brightness Display Printing p.134 133Digital Print Order Format Dpof p.143 Some printers may make a beeping sound Preparing to Print134 While you look at the LCD monitor To a printer 135Press the x button Icon will appear on the upper left to 136 Select Paper settingsWPrinting Select the image to be printed 137 QSetting the Paper SizeYSetting the Paper Type USetting the Page Layout Depending on the printer Set the printing effects138 Screen display may differ Start printing Set the date and file number imprinting139 140 EAdjustment of Printing Effects Press 0 to exit the trimming Trimming the Image141 142 Handling Printer Errors Error Messages Set the options as desired Setting the Printing Options Select Print orderSelect Set up Digital Print Order Format Dpof 144 Exit the settingPress the 7 button 145 Print Ordering Under the 3 tab, select Print order Select Print Set the Paper settings. p.136WDirect Printing with Dpof Prepare to print 147 DTransferring Images to a Personal Computer Transfer order images Transferring Images to a Personal Computer148 New images 149 3Selecting the Images to be TransferredSelect Transfer order Select Sel.Image 150 Select the image to be transferredAbout All image Customizing Camera Select the Custom Function No Setting Custom FunctionsNChange the setting as desired Select Custom Functions C.Fn 153 Custom Functions Fn I Exposure 3Custom Function SettingsN154 Off Fn II Image155 Off Auto Disable Enable156 157 Fn III Auto focus/Drive 158 Fn IV Operation/Others 159 Retain power OFF statusDisplay Select Register Select My Menu settingsMy Menu settings 3Registering My MenuN Reference Subjects difficult to focus When Autofocus Fails162 Insert the DC Coupler Using a Household Power OutletConnect the power cord Connect the DC Coupler DR-E5 Remote Switch RS-60E3 Sold separately Using the Remote Switch164 165 Using the Eyepiece CoverRemove the eyecup Attaching the eyepiece cover Basically operates like a built-in flash for easy operation External SpeedlitesEOS-dedicated, EX-series Speedlites 166 Sync Speed Using Non-Canon Flash UnitsCanon Speedlites other than the EX-series 167 2Shooting 2 Red Menu Settings168 1Shooting 1 Red 7Set-up 3 Yellow 1695Set-up 1 Yellow 6Set-up 2 Yellow 170 Function Availability Table AEB 171 Camera turns off by itself Troubleshooting GuideBattery becomes exhausted quickly 172 173 Shooting date and time displayed is incorrect 174Built-in flash does not fire Image cannot be erased 175 Error Codes 176 AccessoriesSystem Map Bundled System Map 177 178 Specifications Viewfinder 179Autofocus Built-in Flash 180Exposure Control Shutter Live View Functions 181External Speedlite Drive System 182 183 Dimensions and WeightBattery Pack LP-E5 Battery Charger LC-E5 184 Battery Charger LC-E5EEF-S 18-55mm f/3.5-5.6 is 185 TrademarksEF-S 18-55mm f/3.5-5.6 186 Safety Warnings Preventing Injury or Equipment Damage 187 European Union and EEA only 188 189 Index 190 Image sensor 191 192 DEP 193 194 195 CEL-SJ1RA210

Canon EOS 1000D Installing and Removing the Card, Installing the Card Open the cover

Models: EOS 1000D

Installing and Removing the Card

The captured image is recorded onto the card (sold separately).

Installing the Card

1 Open the cover.

Slide the cover as shown by the arrow to open it.

Insert the Card.