wPrinting with PictBridge
Adjustment of Printing Effects
With step 4, select the item. When
is displayed as shown on the left, press the <C> button. You can then set the parameters for fine adjustments.
The parameters that can be adjusted for the selected item are shown in the table below.
Select the item, then press <0>.
|
|
|
| (k: Adjustable) | |
|
|
|
|
| |
| Item | Off / On / Vivid / | Natural M | B/W / Cool tone | |
| Natural | / Warm tone | |||
|
|
| |||
Brightness | k | k | k | ||
Adjust levels | – | k | k | ||
k(face) Brightener | k | k | k | ||
k | k | k | |||
| Contrast |
| k | k | |
Detail | Saturation | – | k |
| |
set. | Color tone | k | – | ||
| |||||
| Color balance |
| k |
| |
After making fine adjustments for the printing effect, if you do step 4 again to change the printing effect’s setting, the adjustments will all revert to the default.
When [Default] is selected, the printing adjustments can not be adjusted.
[Brightness]
Press the <U> key to make the adjustment, then press <0>.
135